Installation Guide: Ekotex Electronic Water Descaler

1. Choose the Installation Location:
   Select a straight section of your main water pipe (inlet) where the device can be easily mounted and powered.
2. Clean the Pipe Surface:
   Wipe the pipe clean and dry to ensure good contact for the signal cables.
3. Attach the Device:
   Secure the Ekotex descaler unit to the pipe using the provided mounting hardware or straps.
4. Wrap the Signal Cables:
   Wind the signal cables tightly around the pipe as shown in the product manual. Ensure even spacing and firm contact.
5. Connect to Power:
   Plug the device into a nearby power outlet. The indicator light should turn on, confirming operation.
6. Check for Operation:
   Verify the device is working as per the manual (indicator light, display, or app if available).
7. Enjoy Scale-Free Water:
   The system is now active. No plumbing changes or chemicals required. Enjoy the benefits of soft, scale-free water!